Landi Renzo Injector Rail RGI MED - 3x LPG Injectors - Incl. Pressure sensor

-35%

Category: GI-25 Series

Reference: 720007040

Brand: Landi Renzo
Type number: RGI-25-3C-CS
Injector Approval Numbers: (LPG) E13 67R-010234 - (CNG) E13 110R-000058
Injector Rail (Holder) Approval Numbers: (LPG) E13 67R-010233 - (CNG) E13 110R-000057
Injector size: This is a choice option
Electrical connection: Bosch AMP 2 Pole
Note: RGI 25 3 cyl. Incl. Pressure sensor 3.5 bar
Gas systems: Landi Omegas (Direct) /Eurogas Omegas /Landi LSI

The injector size is indicated by the color of the plastic cap and the code on the top of the injector next to the plug connection.

FREE GAS FILTER included TYPE F-781

€206.70 tax incl.

€318.00

Save 35%

Foreign companies with a valid VAT number shop VAT-free here! READ HOW.

- Delivery: 1-4 days

Safe & Trusted

Webshop Trustmark Certified Member & Secured by SSL. Your data and orders are safe here.

Delivery policy

Safe and Secure Shipping with DPD or DHL

Refund policy

Política de reembolso de 14 días y derecho de devolución

Description
Product Details

Landi Renzo LPG Injector Rail RGI MED - 3x Injectors AMP / Bosch Connector - Including Pressure Sensor 3.5bar

For Gas systems: 3/6 Cylinder engines with Landi Renzo Omegas, Eurogas Omegas, Landi LSI
OEM Gas systems: Citroen, Dacia, Opel, Peugeot, Renault, Skoda, VW
NOT SUITABLE FOR FIAT ALFA LANCIA

PAY ATTENTION! The pressure sensor at some factory OPEL system (Landi Renzo) uses a different pressure sensor (5.5 bar). The standard pressure sensor (3.5 bar) on the rail is not compatible with Opel.
Check which type of pressure sensor is used on your OPEL. (3.5 bar / 5.5 bar). This is often mentioned on the pressure sensor.
Otherwise order the injector rail without sensor and transfer the pressure sensor. Or order separate injectors.

Note: the color (size of the injector) is indicated by the color of the plastic cap on the top of the injector.
Choose your injector size / color: Green / Black /White / Orange / Blue / Purple

(Small) Green Injector Landi MED GI25-22 until 20 kW per cylinder
(Medium) Black Injector Landi MED GI25-65 until 28 kW per cylinder
(Large) White Injector Landi MED GI25-80 until 37 kW per cylinder

(Small) Orange Injector Landi MED GI25-22 until 20 kW per cylinder
(Medium) Blue Injector Landi MED GI25-65 until 28 kW per cylinder
(Large) Purple Injector Landi MED GI25-80 until 37 kW per cylinder

Important information regarding Gas Injectors

ATTENTION! Replace all injectors and use the correct injector size!

ATTENTION!

If you DO NOT replace ALL the injectors, there are many possibilities of differences between your new and old (contaminated) injectors, so the engine will still work badly and it may even seem that the new injectors do not work properly. All injectors are controlled with more or less the same injection time. The old injectors will dose more gas than the new injectors, because they are still accurate. Because the average mix is still too rich, the engine management will shorten the injection time, so that the new injectors will deliver even less. This will be particularly noticeable with a low engine load (idle) and much less noticeable with a higher engine load (not a high speed, but with the accelerator pedal well depressed).

Therefore it's important to replace all the injectors at the same time.

NB! USE THE SAME INJECTOR SIZE AS NOW USED ON YOUR CAR TO AVOID ADJUSTMENTS (SOFTWARE).

Replace the gas phase filter in time to prevent contamination of the gas injectors!

Replace the gas phase filter in time and regularly!

The filter lasts a maximum of 20,000 km. Preferably replace the filter earlier.
This replacement period applies with an average engine capacity of approximately 1.8L. Larger engines use more gas, which means the gas filter needs to be replaced sooner.
It is also possible that the LPG contains a lot of contamination (with oil and fats) at some refueling, which means that it is necessary to replace the filter earlier. Take this into account.
The timely replacement of the gas filter is necessary to prevent contamination of the gas system and gas injectors.

TIP!

Use 2 filters one after the other (in series) instead of just 1 filter. This allows you to prevent the contamination of the injectors even more when driving on a polluted LPG quality, for example. In this way there is a second filter that can still catch the excess paraffin.

Background information regarding gas injector problems

In most cases the problem is caused by the fact that the gas injectors are contaminated with paraffin (oils and greases from the LPG). The filter upstream of the injectors must ensure that the injectors do not contaminate quickly. This gas phase filter will eventually become saturated and must be replaced every 20,000 km. If the filter is not replaced, the paraffin will no longer be trapped and end up in the injectors. It is not the case that the injectors leak or do not open anymore. But the opening and closing time are no longer correct. The injectors remain open longer than they should (with dynamic behavior), which means that too much fuel is being dosed. (too rich mixture) The injectors will then deviate, especially with short injection times (low engine load). The engine is going to run messy and there are too large differences between the injectors. Cleaning the injectors often makes no sense, because there is often too much wear in the injector occurred, as a result of which the guide of the plunger (sealing disk) no longer has the right fit. The plunger does not go smoothly and lord, but goes up and down stumbling and wobbling. If the injectors are replaced without replacing the filter, the new injectors will soon become dirty again. (read symptom control, no long-term solution)

Application List Landi Renzo Injector Rail 3 cylinder

NB! This list is not complete and not 100% accurate and is for guidance only.

CHEVROLET with an OEM LANDI RENZO system
CHEVROLET MATIZ 800 Type Injector Green 3 cil. met sensor (238206001)

CITROEN with an OEM LANDI RENZO system
CITROEN met LANDI RENZO systeem
CITROEN C1 1.0L 1KR AM C. Type Injector Green 3 cil. met sensor (238206001)

OPEL with an OEM LANDI RENZO system
OPEL AGILA 1.0 Z10XEP Type Injector Green 3 cyl. with sensor (238206001)
OPEL ANTARA 3.2 HFV6 Type Injector White 6 cyl. (1 x RGI3 + 1 x RGI3+sensor) (238217001)
OPEL CORSA C 1.0 Z10XEP Type Injector Green 3 cyl. with sensor (238206001)
OPEL CORSA D 1.0 Z10XEP Type Injector Green 3 cyl. with sensor (238206001)
OPEL AGILA-SPLASH K10B E5 AM C. Type Injector Green 3 cyl. with sensor (238206001)

PEUGEOT with an OEM LANDI RENZO system
PEUGEOT with LANDI RENZO system
PEUGEOT 107 1.0L 1KR AM COM Type Injector Green 3 cyl. with sensor (238206001)

SAAB with an OEM LANDI RENZO system
SAAB 9-7X 4.2 Type Injector White 6 cyl. (1 x RGI3 + 1 x RGI3+sensor) (238217001)

SEAT with an OEM LANDI RENZO system
SEAT CORDOBA 1.2 BXV Type Injector Green 3 cyl. with sensor (238206001)
SEAT IBIZA 1.2 BXV Type Injector Green 3 cyl. with sensor (238206001)
SEAT NUOVA IBIZA 1.2 BZG/CGPA Type Injector Green 3 cyl. with sensor (238206001)

SKODA with an OEM LANDI RENZO system
SKODA NEW FABIA 1.2 BBM/CHFA Type Injector Green 3 cyl. with sensor (238206001)
SKODA ROOMSTER 1.2 BME Type Injector Green 3 cyl. with sensor (238206001)
SKODA ROOMSTER/NEW FABIA 1.2 BZG/CGPA Type Injector Green 3 cyl. with sensor (238206001)
SKODA FABIA 1.2L CGPA E5 Type Injector Green 3 cyl. with sensor (238206001)
SKODA FABIA BER/SW 1.2CHFA E5 KM0 C Type Injector Green 3 cyl. with sensor (238206001)

SMART with an OEM LANDI RENZO system
SMART FOR TWO 3B21 1.0L Type Injector Green 3 cyl. with sensor (238206001)

SUZUKI with an OEM LANDI RENZO system
SUZUKI PIXO/ALTO K10B COMP.AM Type Injector Green 3 cyl. with sensor (238206001)

TOYOTA with an OEM LANDI RENZO system
TOYOTA YARIS 1.0 1KR AM C. Type Injector Green 3 cyl. with sensor (238206001)
TOYOTA AYGO1.0 1KR AM C Type Injector Green 3 cyl. with sensor (238206001)

VOLKSWAGEN with an OEM LANDI RENZO system
VW FOX 1.2 BMD Type Injector Green 3 cyl. with sensor (238206001)
VW POLO 1.2 BBM Type Injector Green 3 cyl. with sensor (238206001)
VW POLO 1.2 BME Type Injector Green 3 cyl. with sensor (238206001)
VW POLO 1.2 BZG/CGPA COMP Type Injector Green 3 cyl. with sensor (238206001)
VW POLO NUOVA 1.2 CGPA COM Type Injector Green 3 cyl. with sensor (238206001)

Reference 720007040

Data sheet

Characteristic:: Including Pressure Sensor 3.5barAMP / Bosch Connectors
Attention!: LET EXTRA GOED OP BIJ OPEL!
Right of Withdrawal: WARNING! The right of withdrawal does not apply to electronic components. Returns or exchanges are NOT possible.
Downloads:: Manuals and Documentation - See the tab Attachments on this page.
Related Products:: See bottom of this page
Shipping Cost:: Is calculated in the Checkout and is visible there. (Depends on total weight, destination and discounts.)
Application:: Citroen Opel Peugeot Seat Skoda Toyota VW

Specific References