LPG Gas Shutt Off Valve Valtek Tipo 07 M10 x 6mm / 8mm AMP Connector
€35.50 -20%
€28.40 tax incl.
Brand: Landi Renzo Group
Manufacturer code: 1628002
Type number: LOVATO RGV140
Alternate codes: 2628002
Approval number: E4 67R-0192006
Power: from 90 kW to 140 kW (190 HP) Engine power
Input connection: Ø6mm compression - (M10x1) internal thread
Outlet connection: Ø19mm Hose barb
Water connections: Ø16mm
Outlet pressure: Atmospheric
Electrical connection: FASTON 2 Pole
Pressure class: 67R-01 Class 1 (max. 30 bar)
Material: Steel
MAP Connection: Ø6mm.
Gas valve: Excl. External Gas Shut Off Valve
Note: Vacuum Operated - Elect. Choke for Gas Start - Forklifts
Foreign companies with a valid VAT number shop VAT-free here! READ HOW.
Webshop Trustmark Certified Member & Secured by SSL. Your data and orders are safe here.
Safe and Secure Shipping with DPD or DHL
Política de reembolso de 14 días y derecho de devolución
The LOVATO RGV140 (basic type RG92) is a two-stage reducer for LPG mixing piece systems and is homologated according to European regulation ECE 67R-01. The reducer is equipped with a solenoid valve to give a gas start quantity and an integrated idle adjustment screw.
The reducer is activated / opened by the engine vacuum. (Not by an electrical circuit / safety relay.)
The reducer is equipped with an electric choke coil that can be momentarily controlled with a 12V pulse before starting, so that a "puff" of gas comes out of the reducer that enables gas starting. DO NOT activate this coil permanently!
Thanks to its sensitivity membrane and its reliability, the vaporizer guarantees perfect driving pleasure.
For mixed piece gas systems and for direct gas starting (elec. choke) and engines from 90 kW to 140 kW (190 HP) with Carburetor or Monopoint injection. (Often on Forklifts)
Suitable for the following gas systems:
- Traditional Mixing System with Gas Start (Forklifts)
- Gas systems: Mixing piece system with gas start (forklifts) For Cars or Forklift Trucks with Carburettor
- NOT SUITABLE FOR LPG INJECTION!
Approval number: 67R-0192006 (ATTENTION! This is an approval number and may be valid for a series of products / family. This is NOT a type number!!! Please check the Model code / Type number / Size of the desired product.)
Gas valve: Not included. ( Valtek Type 07 recommended)
IMPORTANT: reducer operation is dependent on the agitator/mixer and proper adjustment of the adjusting screws to properly adjust the evaporator for the agitator suction and motor consumption.
How do you properly adjust the LOVATO RGV140 reducer ?
In a Nutshell: Idling on gas bypass only. Then turn off the throttle a bit, so that the engine gets a leaner mixture at idle. (the engine starts to run less smoothly). And then adjust the mixture again via the second adjustment screw (diaphragm / spring tension), so that the valve of the final stage starts to open. Idle: 80-90% on gas bypass and the rest of the throttle through the tilt valve.
Data sheet