LPG Tank Installation Kit - Tank mounting material - for Cylinder from 90L until 120L

-20%

LPG Tank Installation Kit for Cylinder tanks 90L until 120L

Category: Tank Mounting Kits

Reference: 201000250

Use this set to mount your cylinder tank or vapor gas tank (cylinder) with a diameter of minimum 27cm and maximum 40cm.
The set comes standard with a tank frame + 2 tank straps, insulation strip, bolts and nuts, a filling connection , a filling hose , a breather hose and bottom breather and various fasteners.

TYPE : Rear set (Tank mounting material) for Cylinder tank or Vapor gas tank (cylinder)

Only suitable for LPG Cylinder tank

Specify for which Type: Filling point, Filling adapters and Filling hose.
Choose your desired filling hose length: from 0.50m - 3.50m

Product customization

Don't forget to save your customization to be able to add to cart

€145.27 tax incl.

€181.59

Save 20%

Foreign companies with a valid VAT number shop VAT-free here! READ HOW.

- Delivery: 1-4 days

Safe & Trusted

Webshop Trustmark Certified Member & Secured by SSL. Your data and orders are safe here.

Delivery policy

Safe and Secure Shipping with DPD or DHL

Refund policy

Política de reembolso de 14 días y derecho de devolución

LPG Tank Installation Kit - Tank mounting material - for Cylinder from 90L until 120L

You can order this tank installation set in combination with a matching cylinder tank for mounting your LPG tank or vapor gas cylinder tank (90L until 120L) (with a diameter of minimum 27cm and maximum 40cm). (For larger cylinder tanks see the larger associated tank installation sets)

Set content:
- 1 x Tank frame + insulation strips (we supply a suitable frame for the LPG tank you ordered up to 120L)
- 2 x Tension strap set (4x tension strap incl. mounting brackets and bolts)
- 1 x Filling connection (type of your choice. See options)
- 1 x Filling hose (Desired filling hose length optionsl)
- Filling hose clamps for fixing your filling hose
- Mounting material Bolts, nuts, self-tapping screws, hose clamps
- 1 x Ventilation hose To be connected to the tank box of the LPG tank (LPG built-in)
- 1 x Bottom air vent To connect the vent hose and to be able to carry the gases out through the bottom.

Application: A tank frame is used in combination with lashing straps (tank straps) to attach an LPG cylinder tank (LPG vapor tank) with a tank diameter of 270 mm and up to 400 mm. The weld seams of the tank must fall within the length of the tank frame. As an indicative rule, you can determine the length between the weld seams by subtracting 10 cm from the total tank length.

The correct number of tank straps and mounting bolts to use depends, among other things, on the tank capacity and the position of the LPG tank. Consult the national installation requirements (see the appendices tab on this page).

Coating: The tank frame is untreated. We recommend that the tank frame be provided with a protective anti-rust coating after any adjustments, such as the installation of additional mounting holes, mounting brackets and/or a bulkhead.

Gebruik een kopschot bij de inde lengterichting geplaatste tank

Use a cross connection (headboard) in the case the LPG tank is placed lengthwise...

In the case the LPG tank is placed lengthwise (in the direction of travel), a cross connection (headboard) must be installed at the front of the tank frame to prevent the tank from sliding off the frame. This cross connection needs to:

A. have at least the same thickness as the tank frame;

B. be at least 30 mm high with the top of the cross connection being at least 30 mm above the bottom of the tank, and

C. be as close as possible to or within the convexity of the tank.

The tank frame is not provided with such a cross connection (headboard) as standard and must, if necessary, be installed on the correct side of the tank rack.

Tips & Advice

Provide the entire tank installation with a protective coating as soon as everything is properly fixed. This is particularly important in the case of substructure. This extends the life of the tank and structure. Preferably repeat this annually.

Have the installation of the gas tank and the assembly of the tank frame carried out and/or checked by an expert person or specialist company.

Follow the national regulations and installation requirements fora correct installation. (see the attachments tab on this page).

In the following cases, preferably DO NOT use a tank frame for mounting!

For substructure of an LPG cylinder tank larger than 80L (where the tank straps also have to support the weight of the tank), we recommend mounting them using: tank fixation rings or cylinder tank brackets instead of using a tank frame and tension straps.

For surface-mounted and LPG cylinder tanks larger than 140 L, we do not recommend mounting them using a tank frame and tank straps, but a specially intended tank bracket set is available for a tank diameter of 450 mm.

Assembly instructions

Attach the tank frame to a sufficiently strong structure at the predetermined location with a sufficient number of bolts of the correct quality. (review the installation requirements of your national authority.

The gas tank must not make metallic contact with the tank frame. Therefore, use the supplied insulation strip and apply it to the tank frame.

Position the gas tank on the prepared tank frame. Pay attention to the mark (cross with arrow) on the gas tank for correct positioning for proper functioning of the gas tank. The mark indicates the top and the horizontal center plane.

The tank straps (lashing straps) go over the tank and the ends of a tank straps go through the fixation bracket and then back around the tank, under the previously mentioned part of the tank strap that you have just installed. The ends of the tank straps go through the fixation brackets and back under the same tension strap with a minimum overlap of 15 cm (preferably more).

On the rear side of the tank frame the fixation brackets are bolted to the frame. While on the front side, the fixation brackets with the bolt is attached to the upright angular brackets on the tank frame, so you can bring up to tension the fixation straps by further tightening the bolt / nut. Make sure that the fixation straps are properly tensioned and that the tank is pressed well and firmly onto the tank frame without any play. (See images for reference.)

No weakening points may be made in the fixation straps, for example by making a hole in it. Attaching the fixation straps may only be done with the intended and supplied fixation brackets.

Number of straps: The LPG tank must be secured to the tank frame with at least two tank straps (lashing straps). If the tank straps also need to support the weight of the LPG tank, at least three tank straps must be fitted. However, we recommend using at least 4 tank straps in that case. The tank straps are sold per set (2 pieces). The precise number of tank straps to be used depends, among other things, on the tank contents and the positioning of the LPG tank. Use and respect the national installation requirements (see the appendices tab on this page) for correct installation.

Complete Tank mounting Kits including refilling hose and filling point

-20%
Select Options
Wishlist
Compare
Quick view
LPG Tank Installation Kit - Tank mounting material - for Cylinder tanks 23L until 85L
Tank Mounting Kits
€141.87 -20%
€113.50 tax incl.
Use this set to mount your cylinder tank or vapor gas tank (cylinder) with a diameter of minimum 27cm and maximum 40cm.The set comes standard with...
-20%
Select Options
Wishlist
Compare
Quick view
LPG Tank Installation Kit - Tank mounting material - for Cylinder from 90L until 120L
Tank Mounting Kits
€181.59 -20%
€145.27 tax incl.
Use this set to mount your cylinder tank or vapor gas tank (cylinder) with a diameter of minimum 27cm and maximum 40cm.The set comes standard with...
-20%
Select Options
Wishlist
Compare
Quick view
LPG Tank Installation Kit for Cyl. tanks Ø45cm 120L until 230L
Tank Mounting Kits
€231.25 -20%
€185.00 tax incl.
Use this kit to mount your cylinder tank with a diameter of 45cm. The set comes standard with 2 fixation brackets, insulation foam, nuts and bolts,...
-20%
Select Options
Wishlist
Compare
Quick view
Vapour Camper Tank Fixation and Filling Kit for Cylindrical LPG Tanks
Tank Mounting Kits
€181.59 -20%
€145.27 tax incl.
Use this kit to mount your cylinder tank or vapor gas tank (cylinder). The set comes standard with 2 fixation brackets, insulation foam, nuts and...

Reference 201000250

Data sheet

Note:: Only supplied in combination with a matching tank
Downloads:: Manuals and Documentation - See the tab Attachments on this page.
Related Products:: See bottom of this page
Shipping Cost:: Is calculated in the Checkout and is visible there. (Depends on total weight, destination and discounts.)

€11.43 tax incl.

Business customers shop VAT free here!

-< Open the Menu here

Various Parts to refill you LPG Tank with LPG

Different shapes and sizes. Toroidal Tanks at spare wheel location. Cylinder Tanks in the trunk. 1-Hole (Multivalve) and 4-Hole Tanks.

To transport the Liquid LPG to the engine compartment, to filter, to shut off and to VAPORIZE and reduce the pressure

To further distribute the vaporized Gas to the engine, using Gas Hose, Injectors and Filters

Apart form the Gas Parts also other parts are required in other to make the system work such as sensors, switches, car heating Hose and Fuel Parts

To make it easier for the customer we have already combined parts to make a set, such as Engine Conversion Kits, Tank Fixation Kits and Complete Conversion Kits

Refilling parts in order to refill Vapor Tanks and LPG Gas Bottles

For liquid LPG storage in your Motorhome use a LPG Vapor Tank or Gas Bottle and extract the gas in VAPOR Phase

Parts to connect to the high vapor gas pressure downstream the tank and to reduce the pressure

Parts to connect downstream the pressure regulator to distribute the gas in your motorhome

Request a quote for a gas system for your Mobilehome, RV, Motorhome or caravan.

LPG Tank Installation Kit - Tank mounting material - for Cylinder from 90L until 120L

LPG Tank Installation Kit - Tank mounting material - for Cylinder from 90L until 120L

Gebruik een kopschot bij de inde lengterichting geplaatste tank

Complete Tank mounting Kits including refilling hose and filling point

Download

Related filling adapters

Excellent

Free delivery & Discounts

LPG Parts shop with the best prices in Europe.

Business customers shop VAT Free here!

Payment methods

Available payment methods

LPG Parts shop with the best prices in Europe.

Offices & Pick Up Location

Trusted & Secure

Services

Account

Support

Opening Hours

All rights reserved