LPG Gas hose Ø10mm x 17 mm Rubber R67-01 - Per meter

LPG Gas hose  Ø10mm x 17mm Rubber R67-01 - Per meter

For your LPG installation to connect the various components together. Like for example from the LPG reducer to Filter, Injector rail, intake manifold.

Product description:
- Reinforced gas hose with inner diameter Ø10mm and outer diameter Ø17mm.
- Can be ordered per meter.
- With LPG 67R-01 Approval
- With CNG 110R Approval

Function & Application: For your LPG installation to connect the different components together. Like for example from the LPG evaporator to Filter, Injector rail, intake manifold.

Safety instructions: Use a good hose clamp for a good seal.

NB! Measure carefully which gas hose size you need! If you replace a gas hose, the size is usually indicated on the old gas hose, such as ID 14, DN 14 or 14mm. It is always about the inner diameter, because it must fit the hose barb of the corresponding LPG parts, such as the gas reducer, gas filter or injector rail.