1x Fixation Bracket with Foot for LPG Cyl. Tank Ø320mm (incl. bolts & nuts and Isolation)
Type: Steel mounting ring with base for LPG Cyl. tank mounting underslung
Dimensions: Width: 40 mm, Diameter: 32 cm, Thickness: 3 mm
Product Content:
- 1x Mounting bracket with a diameter of 32 cm (min. 2x required for tank mounting)
- Adhesive foam for insulation
- Bolts and nuts for closing the brackets
Tank mounting bracket with adhesive insulation of diameter 32 cm for LPG cylinder camper tanks. Use the correct number of mounting brackets for proper mounting of your LPG Tank.
Type: Steel mounting ring with base for LPG Cyl. tank mounting underslung
Dimensions: Width: 40 mm, Diameter: 32 cm, Thickness: 3 mm
Product Content:
- 1x Mounting bracket with a diameter of 32 cm (min. 2x required for tank mounting)
- Adhesive foam for insulation
- Bolts and nuts for closing the brackets
Tank mounting bracket with adhesive insulation of diameter 32 cm for LPG cylinder camper tanks. Use the correct number of mounting brackets for proper mounting of your LPG Tank.
Foreign companies with a valid VAT number shop VAT-free here! READ HOW.
Safe & TrustedWebshop Trustmark Certified Member & Secured by SSL. Your data and orders are safe here.
Delivery policySafe and Secure Shipping with DPD or DHL
Refund policyPolítica de reembolso de 14 días y derecho de devolución
Type: Steel mounting ring with base for LPG Cyl. tank mounting underslung
Dimensions: Width: 40 mm, Diameter: 32 cm, Thickness: 3 mm
Application: These mounting brackets are used for installing LPG cylinder tanks with a tank diameter of 320 mm. Can also be used to fix a standing gas bottle with a diameter of 32 cm. Use the correct number of mounting brackets for your application (depending on tank size and mounting method). The mounting brackets must fall within the weld seams of the gas tank. Use at least 4 mounting brackets for vapor gas tanks larger than 85L.
Attach the mounting brackets with the base to a strong and sturdy part of the vehicle with a sufficient number and strength of bolts.
The gas tank must not make metallic contact with the tank brackets. Therefore, install insulation in the tank brackets so that the tank cannot make metal-to-metal contact with the brackets. Adhesive foam insulation is included. Apply this to the inside of the mounting brackets.
Bend the mounting brackets slightly open to be able to insert the gas tank.
Determine the position of the gas tank carefully. Pay close attention to the marking (cross with arrow) on the gas tank for correct positioning for proper functioning of the gas tank. The mark indicates the top and the horizontal center plane. And also pay close attention to the position of the flanges of the brackets in relation to the tank fittings (tank cabinet), so that the incoming and outgoing pipes are not blocked. Use a sufficient number of bolts of the correct quality for a sufficiently strong construction.
No weakenings may be made in the mounting brackets, for example by making a hole. Use and respect the national installation requirements / NPR-2577 guidelines for correct installation. (see the attachments tab on this page)
Insulation A steel (or aluminum) LPG tank may not make metallic contact with the mounting brackets. It is therefore necessary to apply an insulating layer between the tank and the brackets. You can use the supplied adhesive foam for this.
Data sheet
CONTACT FORM
